Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of bends, tees and other fabrications. Capacity 1600 to 2500mm / 62 to 100".
Cutting angle up to 67.5 degrees. Lowering rate of saw is hydraulically controlled. Low-profile construction for safe operation.
- Cutting range 1600 to 2500mm OD / 62 to 100"
- Low profile design
- 67.5 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees
- Angular cutting error equal to or less than 1 degree
- Genuine 24 month international warranty
- Saw blade 20*0.9*16800
- 380/415 volt 3 phase 50 Hz. Optional 480 volt 3 phase 60 Hz
- Please note technical specifications of Worldpoly machines may change without notice