PolySaw1710/68 - Workshop Pipe Saws - Worldpoly

Workshop Pipe Saws

PolySaw315/12
(WJC315 90-315mm 3-12")
PolySaw630/24
(WJC630 90-630mm 3"-24")
PolySaw800/32
(WJC800 90-800mm 3"-32")
PolySaw1200/48
(WJC1200 630-1200mm 24"-48")
PolySaw1600/65
(WJC1600 630-1600mm 24"-65")
PolySaw1710/68
(WJC1720/68 630-1710mm 24"-68)
PolySaw2000/78
(1200-2000mm 48"-78")

PolySaw1710/68

Hydraulically operated pipe saw specifically produced for the preparation of pipe segments in PE, PP and other thermoplastic materials, used for the production of bends, tees and other fabrications. Capacity 630/24" to 1710mm/68". Cutting angle is up to 67 degrees. Lowering rate of saw is hydraulically controlled, as are the top-mounted V-clamps used to hold pipe segments in place. Saw blade made in Germany.

Technical Specifications

  • CE approved by SGS www.sgs.com
  • Cutting range 20" to 68" nom. - 630 to 1710mm OD.
  • Angular cutting error equal to or less than 1 degree.
  • Speed of saw blade 250 m/min.
  • 400 volt 3 phase 50 Hz (5.5 kw 13.4 A) alt. 220 volt 3 phase 60 Hz
  • Weight 9,000kg
  • Please note technical specifications of Worldpoly machines may change without notice
Quote