PolySaddleSaw630/24 Special - Saddle Fusion Machines - Worldpoly

Saddle Fusion Machines

PolySaddle630/315 - 24/12
(315-630 main 63-315 out)
PolySaddle1200/630 (48"/24")
(315-1200mm / 12"-48" main)
PolySaddleSaw500/20
(63-500mm or 2"-20")
PolySaddleSaw630/24 Special
(63 to 630mm or 2" to 24")

PolySaddleSaw630/24 Special

Purpose built bandsaw for cutting the radius required when welding reducing tees using PolySaddle630/24, PolySaddle1000/40 or PolySaddle1200/48 saddle fusion machine, or when hand fabricating pipe manifolds.
Cuts pipe segment end to the correct radius for outlet pipes 63mm to 630mm or 2" to 24".
ipe diameter 630mm / 24" cuts at 90 degrees, while pipes 63mm / 2" to 500mm / 20" can be adjusted from 90 to 45 degrees.

Technical Specifications

  • CE approved by SGS www.sgs.com
  • Radius saw is used to cut branch pipes used in production of reducing tees and manifolds.
  • Cuts pipe diameters 63, 90, 110, 125, 140, 160, 200, 225, 250, 280, 315, 355, 400, 450, 500 & 630mm, or 2", 2 1/2", 3", 4", 6", 8", 10", 12", 14", 16", 18", 20" & 24"
  • Angle of cut 90 degrees for pipe diameter 630mm / 24", adjustable from 45 to 90 degrees for diameters 63mm / 2" to 500mm / 20"
  • Electrically operated.
  • Manual feeding speed.
  • 400 volt 3 phase 50 Hz (2.2 kw 4.2 A) alt. 220 volt 3 phase 60 Hz US voltage available.
  • Specifications subject to change without notice. Please conform at tiem of order confirmation.
Quote