PolyForce630 CNC Track Hire - Hire - Worldpoly


Worldpoly160 Hire
Worldpoly250 Hire
Worldpoly315 Hire
Worldpoly450 Hire
Worldpoly630 Hire
PolyForce630 CNC Track Hire
(315-630mm Dual Pressure)
ATS250 Hire
(16 to 400mm)
(50 to 1200mm)

PolyForce630 CNC Track Hire

Worldpoly PolyForce630/24 CNC Track.

Australian Made.

The fastest, safest, most consistent and economical butt welding machine available.
Thanks to 3 years of research and development with Bosch Rexroth and Worldpolys' 50+ years of PE pipeline experience, every weld is the same. PolyForce630 CNC gives you complete control over welding by removing operator variables.

Providing both high and low pressure welding to ASTM, ISO, Australian/New Zealand, DVS, WIS and Fast Weld, Fast Fusion compatible.

Fully automatic heating, changeover and cooling cycle following entry of welding standard, pipe diameter and wall thickness or SDR, automatic detection of pipe slippage, hands-free hydraulic open/close/locking of main clamps.

Intuitive CNC controls easier to use than a smart-phone, impossible to crash clamps with facing tool or heating plate, 4 second automatic changeover after heating, the safest machine on the market with keyed hydraulic lockout and Cat-3 E-stops, restricted operator entry to potential danger zones, internal 10,000+ weld data logger, three speed rubber tracks, cordless remote control, external pipe lifters, and the ability to collect and communicate data externally, this is today's way to weld PE and PP pipe systems from 630mm to 225mm, or 24" to 8".

Todays fusion machine to take your business to the next level.

Technical Specifications

  • Track mounted. Self contained and self propelled
  • Perkins on-board, low-noise, low fuel consumption 1500 RPM generator. 65 dB at operator position
  • Simple operation. Automatic or manual butt fusion. 5000+ weld data logging included. 3.5 second changeover time for 630mm (24") SDR 11 in Automatic mode
  • External hydraulic pipe lifters front and rear
  • Capacity 225 to 630mm OD. Includes two-piece clamp inserts for pipe and fittings diameters 630, 560, 500, 450, 400, 355, 315, 280, 250 & 225mm, and stub device, are included.
  • Weight - 3400 kg
  • Technical specifications subject to change without notice. Please check at time of order confirmation.