Worldpoly PolyForce630/24 CNC AllTerrain Fusion Machine. Australian Made.
Born from nearly 60 years and three generations of experience with PE pipe and a 3 year dedicated research and development project with Bosch Rexroth, Worldpoly manufactures the PolyRover and PolyForce range in Australia to provide todays' HDPE pipe fusion machine for welding according to both high and low pressure standards.
PolyForce630 CNC provides the highest quality and most consistent high and low pressure butt fusion possible. High pressure (SHP) SDR 11 HDPE butt welds consistently test between 101% and 107% of host pipe strength. Under the correct site conditions, PolyForce630/24 CNC can reduce welding time by more than 50%.
The unit was designed with Occupational Health and Safety (as well as usability) in mind. Two-handed controls with dead-man switches, keyed hydraulic safety lockout, 4 x Cat3 E-stops and restricted human entry to danger zones mean a significantly safer working environment for operators. Operator training is provided with every machine, including registered licence. The machine can be supplied to operate only when this licence number is entered.
A 3.5 second automatic changeover time for 630mm / 24" OD SDR 11 and impossible to crash pipe faces after heating reduces or eliminates brittle failure through operator variables. Automatic intuitive CNC or manual control gives you optimal control. Highest possible level of HDPE pipe weld quality, and easier to use than a smartphone.
Automatic control of temperature, time and pressure through the use of Bosch Rexroths almost indestructible mobile PLC – the same as is used in underground rock drills, means it's a tough as your worksite. The fully automatic heating, changeover and cooling cycle following entry of welding standard, pipe diameter and wall thickness or SDR and automatic detection of pipe slippage takes away the chance of error. Incorporated 5,000 weld data logging, optional remote Bluetooth, GPS & Satellite communication, and GPS means you have full welding data in hand.
Hydraulic open/close/locking clamps, heating plate and facing tool without operator contact, and the clamps, heating plate and facing tool cannot crash. Butt welding between clamps 2 & 3 or 3 & 4 for fittings, fabrications etc. makes the machine a true multi-tasker.
Australian designed and manufactured, the toughest and arguably most easily operated HDPE pipe welding machine on the market. PolyForce630/24 CNC reduces welding time and workload on remote sites, allowing superb quality control, and faster, more efficient butt fusion of PE and PP pipelines. Practical design with the ability to butt weld HDPE pipe at both high and low pressure. Manual or CNC operation, hydraulically lifted facing tool and heating plate, hydraulic controls and pump all on-board the main frame. Hydraulic open/close/locking of pipe clamps - with crash protection and without operator contact during operation.
Easy pipeline, trench or workshop butt fusion machine, supplied complete and ready to weld from 315 to 630mm / 8" or 12” to 24" diameter pipes and fittings between clamps 3 & 4 for tight work, plus high quality and sturdy construction provides an excellent platform for pipeline welding. Standard pricing includes all diameter clamps and stub device. PolyForce630 CNC. Todays’ HDPE fusion welder to take your business to the next level.