PolyForce1000/40 CNC Track - Field Welding Machines - Metric - Worldpoly

Field Welding Machines - Metric

PolyBasic160 LF
Worldpoly160 LF
Worldpoly250 LF
Worldpoly315 LF
Worldpoly315 HF
(Dual Pressure 90-315mm)
Worldpoly315 CNC LF
Worldpoly355/14 HF
Worldpoly450 LF
Worldpoly450 HF
(Dual Pressure 200-450mm)
Worldpoly500 LF
Worldpoly630 LF
PolyRover630/24 Trench LF
PolyRover630/24 AllTerrain LF
PolyForce630/24 CNC Trench
(225-630mm Dual Pressure)
PolyForce630/24 CNC AllTerrain
(315-630mm/12-24" Dual Pressure)
PolyForce630/24 CNC Track
(315-630mm Dual Pressure)
Worldpoly800 LF
(450-800mm / 18-30)
Worldpoly1000 LF
PolyRover1000 Trench LF
PolyRover1000 AllTerrain LF
PolyForce1000/40 CNC AllTerrain
(500 - 1000mm / 20" - 40")
PolyForce1000/40 CNC Track
(500-1000mm/20 - 40")
Worldpoly1200 LF
Worldpoly1200/48 Hydra LF
(630-1200mm / 24-48")
PolyForce 1200/48 AllTerrain
(24 - 48" IPS / 630 - 1200mm)
Worldpoly1600/63 LF
Worldpoly1600/63 Hydra LF
Worldpoly1600/63 Hydra HF
(900-1600mm/36-63" IPS)
Worldpoly2000/80 LF
Worldpoly2000/80 Hydra LF
Worldpoly2500/100 Hydra LF



PolyForce1000/40 CNC Track

Worldpoly PolyForce1000/40 Track.

High and low pressure butt welding machine including on-board hydraulic pump, intuitive CNC or manual controls, hydraulically movable facing tool and heating plate, hydraulic open/close/locking of pipe clamps, aluminium stub device and 4 circles of two-piece clamps 1000mm to 500mm / alt. 40" to 20".

Tracked base includes low-noise Perkins diesel generator, three speed rubber tracks, remote control, external hydraulic pipe lifters etc.

Technical Specifications

  • PolyForce1000/40 Tracked - Australian Made
  • Track mounted, self contained and self propelled
  • Hydraulic in/out facing tool and heating plate with crash protection. No longer are these considered consumeables
  • Hydraulic open/close/locking of main clamps without operator contact
  • Perkins on-board low-noise low fuel consumption 1500 RPM generator. Less than 60 dB at operator position.
  • Simple operation. Automatic or manual. 20,000+ weld data logging
  • Bosch Rexroth hydraulics - locally serviceable
  • Pipe clamps provide prevent slippage even under extreme conditions
  • External hydraulic pipe lifters front and rear
  • Tracked base completely self-contained for use as utility vehicle on-site
  • Self-contained welding unit easily removed for site and trench work
  • Long operating time thanks to 1500 RPM low-noise diesel - 18 to 25 hours under normal welding conditions
  • Built tough, locally serviceable, low-noise. Just what you've been looking for
  • Specifications:
  • Capacity 500 to 1000mm OD / alternatively 40" to 20". Two-piece clamp inserts for pipe and fittings diameters 1000, 900, 800, 710, 630, 560 and 500mm, and stub device, are included
  • Electric start with remote start on operator side
  • Welded steel welding machine frame and tracked base
  • Italian track assembly, rubber tracks, three-speed, 30+ degree capacity, automatic braking when stopped
  • Optional wireless remote control. Wired emergency control
  • Rated lifting points on welding machine and frame, spreader bar available
  • Maximum pump operating pressure - 250 bar / 25 MPa / 3625 psi
  • Fuel capacity - 70 litres / 18.5 US gallons / 20 hours
  • Engine - Perkins 2216 cc, 4 cylinder turbo, 1500 RPM low-noise diesel
  • Weight - 5400 kg / 11,880 lb.
  • Cylinder section 12,922 mm2 / 200.2 inch2. Optional cylinders available with increased force, or decreased if welding thin wall pipes.
  • Technical specifications subject to change without notice. Please check at time of order confirmation.