PolyBasic160 LF - Field Welding Machines - Metric - Worldpoly

Field Welding Machines - Metric

Worldpoly160 LF
PolyBasic160 LF
Worldpoly250 LF
Worldpoly250 High Force
(Dual Pressure 63-250mm)
Worldpoly315 LF
Worldpoly315 High Force
(Dual Pressure 90-315mm)
Worldpoly315 CNC LF
Worldpoly355/14 High Force
Worldpoly355 CNC LF
Worldpoly450 LF
Worldpoly450 High Force
(Dual Pressure 200-450mm)
Worldpoly500 LF
Worldpoly500 HF
Worldpoly630 LF
PolyRover630/24 Trench
PolyRover630/24 AllTerrain LF
Worldpoly630 CNC LF
PolyForce630/24 CNC Trench
(225-630mm Dual Pressure)
PolyForce630/24 CNC AllTerrain
(315-630mm/12-24" Dual Pressure)
PolyForce630/24 CNC Track HF
(315-630mm Dual Pressure)
PolyRover1000 Trench
PolyRover1000 AllTerrain
PolyForce1000/40 CNC AllTerrain
(500 - 1000mm / 20" - 40")
PolyForce1000/40 CNC Track
(500-1000mm/18 - 40")
Worldpoly1200/48 Hydra
(630-1200mm / 24-48")
PolyForce 1200/48 CNC AllTerrain
(24" - 48" IPS / 630mm - 1200mm)
Worldpoly1600/64 LF
Worldpoly1600/65 Hydra
PolyForce 1600 AllTerrain
(1600 - 900mm)
Worldpoly2000/80 Hydra
Worldpoly2500/100 Hydra


PolyBasic160 LF

A manually operated butt-welding machine suitable for PE and PP pipes and fittings from 40 to 160mm OD. Efficient design and construction provides an excellent low cost machine for welding both on the worksite and in the factory. The use of high quality Aluminium castings allows for lower weight without compromising strength and performance. Optional torque wrench allows welding force to be read.

Technical Specifications

  • Welding range 40 to 160mm: 40 to 63mm - SDR7.4 to SDR 11. 75mm to 90mm - SDR 9 to SDR 17. 110mm to 160mm SDR 11 to SDR 41
  • Complete and ready to weld.
  • Genuine 12 months international warranty.
  • Main frame includes light weight alloy main clamps of 160mm diameter.
  • Layer clamps 160x140, 140x125, 125x110, 110x90, 90x75, 75x63, 63x50 & 50x40mm.
  • Removable cast Aluminum PTFE coated heating plate with electronic temperature control.
  • Removable cast Aluminum electrically operated facing tool.
  • Stand for heating plate and facing tool.
  • Manual opening of frame. Optional torque wrench for measurement of welding force.
  • 230 volt 50/60 Hz 1 phase (1.75 kw 9.0 A).
  • Requires generator minimum 2.3 KVA.
  • Net weight 57kg
  • Note - This unit does not accurately read force below 20N/mpa. Drag + welding force must equal minimum 20N/mpa for accurate welding.
  • Not recommended for welding pipe having wall thickness less than SDR 11, in diameters 63mm OD and below.
  • Please refer to Australian specifications http://www.pipa.com.au/sites/default/files/document/attachment/pop003.pdf , and http://www.pipa.com.au/sites/default/files/document/attachment/pop009.pdf if your intention is to weld SDR 17 'Rural' PE pipe.
  • Please note technical specifications of Worldpoly machines may change without notice