LP315 - Electrofusion - Worldpoly

Electrofusion

ATS180
(16 to 180mm)
ATS250
(16 to 400mm)
LP315
(32 to 315mm)
ACT3
(16 to 630mm )
ATS High Power
(16 to 1200mm)
ATS4000
(500 - 4000mm)
WeldPrep63
(20-63mm)
PipePeeler400
(63 - 400mm)
PowerScrape1400
(355 to 1400mm)
PolyScraper40
(40mm/1.5")
PolyScraper62
(62mm/2.5")
VeeClamp250
(55 - 250mm)
VeeClamp500
(55mm - 500mm)
MultiClamp180
(63 - 180mm)
MultiClamp180 T
(55 - 180mm)
VariClampUniversal
(16 - 63mm)
SaddleClamp500
(Up to 500mm)

 

LP315

This equipment is designed to weld electrofusion fittings suitable for low pressure PE pipe work systems from 32mm to 315mm diameter.

The welding output of this equipment is a controlled current of 5A or 10A and a controlled voltage of 220V.

It has been designed to operate on a 230V supply and has been made in a hand held plastic case that is easy to hold and carry. It has a steel carrying box to protect it from harsh construction site conditions.

It can weld fittings commonly made by Geberit, Wavin, Valsir, Polypipe and Akatherm which are used for siphonic rainwater and waste water applications.

Technical Specifications

  • Capacity: 32 to 315mm
  • Welding time: 80 to 420 seconds
  • Supply voltage: 230V (40-60Hz)
  • Supply current: 1-14A (230V)
  • Supply power: 3300 W
  • Weight: 4 kg
  • Size: 20 x 10 x 6 cm
  • Operating temperature: 15C to +50C
  • Environmental protection: IP65
  • Supply cable: 5m
  • Welding cable: 3m
  • Yellow Mode:
  • - Geberit, Wavin, Polypipe, Valsir, Akatherm: 32mm to 160mm
  • - Controlled welding current: 5A
  • - Welding voltage: 28V to 186V
  • Blue Mode:
  • - Polypipe, Valsir, Akatherm: 200mm to 315mm
  • - Controlled welding voltage: 230V
  • - Welding current: 4A to 10A
  • Red Mode:
  • - Geberit: 200mm to 315mm
  • - Controlled welding voltage: 230V
  • - Welding current: 4A to 11A
  • Brown Mode:
  • - Wavin WaviDuo: 200mm to 315mm
  • - Controlled welding current: 10A
  • - Welding voltage: 28V to 186V
Quote